Average Reviews:
(More customer reviews)After reading all of the reviews I thought man, I have to get me some of this. Well I did and my personal experience isn't that good.
Tried it on my 50" plasma and initially it seemed to work pretty well, but as I looked closely at a reflection in the plasma glass I saw streaks! So, I got a flashlight and looked over the entire display and sure enough, there were streaks all over. Now I'm not one to just slap some cleaner on and a couple of swipes and I'm done. I meticulously polish the screen.
Started over doing a very small section, applying cleaner to cloth, spreading on display, turning cloth to dry area, polish, polish polish - still streaks. Mind you I'm doing this with a flashlight in hand, so every little flaw is visible.
I found that the only way to prevent streaks is to continue working the damp cloth on th display until it less damp, then turn to the dry area for polishing. Which brings me to another problem ...
After doing the above, I noticed literally hundreds of little fibers on the display, with some seemingly stuck to the screen to where i had to rub harder than i would like to get them off. Even still when i did that there were more fibers. Again, did this with a flashlight.
Lastly, After getting everything seemingly good to go, I did a follow up inspection the day after i cleaned the display with this product and noticed what appeared to be a subtle film on the glass. I took a cloth and wiped it off easily, but darn if it didn't come back in a short while. It looked like some type of mild condensation. Again this was with a flashlight in hand.
After all of this, I went back to my old Mirachem Optix cleaner and a true microfiber cloth (the tighter weave type that is used for lens cleaning). I did one half of the display only and left the other side as it was from the Monster cleaner. After several hours I went to inspect it once again and there was the haze on the Monster side, but the side I sued my old cleaner on was clear. When I say haze, it's not noticeable without the flashlight, so most folks wouldn't see it, but with a flashlight it is obvious, particularly on the black band around the actual viewing area.
I haven't tried this product on my LCDs and it may work great on the plastic surface, as opposed to the glass of the plasma. For me, it's just not worth it. Get a good flashlight and check for yourself ...or don't and you'll never know that it isn't perfect.
Click Here to see more reviews about: Monster TV CLNKIT Alcohol-Free ScreenClean Kit
Get 36% OFF
Click here for more information about Monster TV CLNKIT Alcohol-Free ScreenClean Kit
No comments:
Post a Comment