Cheetah Mounts APTMLB Plasma LCD TV Tilt Wall Mount for Large Displays 40 to 63-Inch and Vesa 800 Displays (Black) Review

Average Reviews:

(More customer reviews)I looked at all of the local stores in the area and all mounts were 3 to 4 times more expensive. I ordered this mount and found it very easy to install with all necessary parts plus a small level. I mounted a 55" Samsung and with the help of my wife, placed the TV on the wall. Tip: You may need to use some washers or spacers on the back of the TV if the screws are a bit too long. If you don't have them at home, any hardware store will have them. Just mount the brackets onto the back of the TV first to see if you need them. I just added a few washers under the head of the screws that attach to the TV and all was fine.
Buy or rent a few videos with the money you save!
I did not use the tilt feature althhough it is there if ever needed. The tilt feature can be used for installing additional cables and then the TV can be pushed back to a vertical position. The TV hugs the wall very nicely just as the "no tilt" models do.
Distance from wall to back of Samsung: Approx. 2 inches. Just right for the cables and power cord which are wall mounted behind the TV. They run up the wall behind the drywall.
After mounting, the TV can be slid back and forth about 8" along the rails that are on the wall. This allows installation flexibilty if you need to center the TV in a spot where the wall studs do not line up with the exact position where you want the TV to be.

Click Here to see more reviews about: Cheetah Mounts APTMLB Plasma LCD TV Tilt Wall Mount for Large Displays 40 to 63-Inch and Vesa 800 Displays (Black)

The APTML tilt mount features a universal design that allows you to mount virtually any LCD/Plasma display. The APTML supports hole patterns up to 33-Inch horizontally by 19-Inch vertically as well as VESA hole patterns up to 600x400mm. The APTML is designed with a slim 1.9-Inch profile as well as 15 degrees of downward tilt. The APTML is constructed with 9 LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTML's solid wall plate allows for quick and easy installation and will support installation to studs up to 30-Inch apart (most homes are constructed with either 16-Inch or 24-Inch wood studs). The APTML mount will fit the majority of LCD and Plasma Displays up to 63-Inch

Get 75% OFF

Click here for more information about Cheetah Mounts APTMLB Plasma LCD TV Tilt Wall Mount for Large Displays 40 to 63-Inch and Vesa 800 Displays (Black)