Bush Segment Cherry Finish Plasma Swivel TV Stand Video Base Review

Average Reviews:

(More customer reviews)My boyfriend got this stand which is the same one as a friend of his had payed a lot more for.
Very nice looking. Sturdy and not that hard to put together.
*note: if your TV is 42in or smaller, the mount may stick out a bit underneath it. Ours does, but we are going to mount small speakers there so it wont matter. I suppose depending on your TV and the positioning of the mount attachment, you could get it hidden.

Click Here to see more reviews about: Bush Segment Cherry Finish Plasma Swivel TV Stand Video Base

Get 54% OFF

Click here for more information about Bush Segment Cherry Finish Plasma Swivel TV Stand Video Base

Read More...

Techcraft Solution Series TRK50B TV Stand Review

Average Reviews:

(More customer reviews)While the quality of the item seems above the norm, customer service from this company is dreadful. My new equipment sat around in boxes waiting for a replacement for a damaged shelf that was delayed, then delayed again, by mix-ups on the company's part. Their refusal to budge an inch from their standard process, even though it meant further delay for a very unhappy consumer who had gotten tired of run-arounds and excuses, is a far cry from the real customer service I've experienced elsewhere. I will never buy another TechCraft item.

Click Here to see more reviews about: Techcraft Solution Series TRK50B TV Stand

Get 40% OFF

Click here for more information about Techcraft Solution Series TRK50B TV Stand

Read More...

OmniMount G3-FP-DARK 37-Inch to 60-Inch Universal Flat Panel Floor Stand Review

Average Reviews:

(More customer reviews)I would definitely buy another one of these. They fit the bill perfectly for a stand that is not intrusive into your room but still can hold enough equipment.
I've had two of these, one with a 32" lcd in my kids room. The space is a little limited for components. He has a cheap stereo, xbox 360, cable box and DVD player and still not cramped for space. The other has a 145lb 50" plasma mounted on it. We have a 45lb receiver, xbox360, PS3 on the bottom shelf, dvd player & sat box on the top shelf. There is a good bit more room for components than it looks like.
This thing is great because you can tilt the screen up and down as well as left to right. If you have the height off just a bit two people can readjust that without removing the TV from the stand.
The only complaint I can even think of is that there were some bolts missing from the package and the holes in the bottom of the back bone were filled with paint. I had to purchase a tap from the hardware store to clean the holes. I am sure omni mount would have replaced the missing bolts but for less than a $1 worth of hardware I just picked them up at the local hardware store. I believe there was a design change but they forgot to change the hardware packs. Both stands were purchased about a year apart and each is slightly different but they both had the exact same screw and bolt packs.
These sell locally for more than amazon lists them and they are hard to find. The stands I found in the big box stores don't hold a candle to this one for build quality and sturdiness. I was not happy with any of the stands I found in the local stores.


Click Here to see more reviews about: OmniMount G3-FP-DARK 37-Inch to 60-Inch Universal Flat Panel Floor Stand

Get 50% OFF

Click here for more information about OmniMount G3-FP-DARK 37-Inch to 60-Inch Universal Flat Panel Floor Stand

Read More...

Inland Pro LCD Monitor Arm 200 (VESA, Desk, & Wall Mount) Review

Average Reviews:

(More customer reviews)Overall, for 30 bucks, this isn't a bad mount, but it wasn't what I was expecting from the images. For the good, it seems pretty sturdy, and will do what it's meant to do, but that's about it. First, this mount does not freely articulate. What appears to be a joint at the bottom of the mount arm is just a decorative cover. Under the cover is a grouping of screw holes that allow you to fix the arm in a variety of positions. There are 4 allen head screws that hold the arm in place. In order to elevate or lower the arm, you would have to remove the cover and those screws, and even then, there's only about 4 or 5 settings, so it's not limitless. The head of the mount where the monitor mounts however, does freely articulate up/down, side to side, and allows for screen rotation. Also the arm while it doesn't adjust up and down freely, does swivel as you might expect.
The next bit that's a little misleading is the wall mount option. Yes, it can be mounted to a wall, but there's no hardware included for that. The wall mount is accomplished by leaving off the clamps used for desk mounting, and using the holes provided for that part to attach the arm to the wall. The problem is the holes are about 3/8" in diameter, so you will need pretty large lag bolts if you want to use them for that. I simply drilled 2 smaller holes in bracket and used 3" drywall screws, which worked perfectly. But if you aren't prepared to do a bit of modification to the mount to facilitate wall mounting, you'll need some pretty big screws or lag bolts.
I rated it a 3 mainly because I think there's some intentional misleading in the design at the bottom to make you think it raises and lowers freely, and that wall mounting isn't quite as easy as they may like you to think. Aside from that it will certainly do its job, and will do what I needed it for. But if you need something with full articulation and ready adjustment, this one probably isn't for you.

Click Here to see more reviews about: Inland Pro LCD Monitor Arm 200 (VESA, Desk, & Wall Mount)

Get 43% OFF

Click here for more information about Inland Pro LCD Monitor Arm 200 (VESA, Desk, & Wall Mount)

Read More...

Avista Sonitus Flat Panel 55-inch TV Console with Glass Shelves, Black Review

Average Reviews:

(More customer reviews)My wife and I think this TV stand is absolutely gorgeous! We're buying a 55" Panasonic G10 plasma TV for ourselves for Christmas which we don't want to wall mount. We live in the Puget Sound WA area which is earthquake prone, so we also didn't want to just buy a console and plop the TV on top of it, even with wall straps. There aren't too many stands that will take a large flat screen. This one barely does. It measures about 19 3/8" from the top shelf to the center of the mount, which is not quite enough to clear the center speaker of my 5.1 system. However, there are enough mounting holes in the brackets that bolt to the TV that I think I can nudge it up 2" more so that won't be a problem. There is plenty of room, both vertical and horizontal, on the bottom shelf for both my Pioneer SC-07 receiver (enormous) and my APC power conditioner. The second shelf has room for the DVR stacked on the DVD player, with the center speaker on the top shelf.
"Some assembly required." This is a very complex system, though not too complicated if you go slowly and look closely at the instruction sheet. The instructions are mostly line drawings with numbers that match up to the appropriate baggie of nuts, bolts, washers, screws, and such. A great number of them. A 10mm wrench and an Allen wrench are also included. I put it together over the course of a couple of evenings, and even with a glass of wine, I only made one small mistake, when I stuck all of the little package of silicone dots between the steel frame and the bottom shelf. Fortunately, our local builder's store had more of them very cheaply, so now I have little gummy-dots under the other two shelves as well. The steel frame is piano-black, glossy powder-coat, and the tempered glass shelves are opaque or barely translucent black. It goes well with our equally glossy black NHT Verve speakers and other electronics. This stand is very sturdy and well balanced. Mine was drop-shipped from Avista in Southern California and arrived in 4 days in perfect condition. The packing is very well done, with the glass in fitted styrofoam, inside a box, inside the shipping carton. We were a little concerned that the size might over-power our viewing room, but it just kind of floats in space, so our worries were for nothing. We couldn't be happier with this purchase. Now all we are waiting for is Black Friday and the TV.

Click Here to see more reviews about: Avista Sonitus Flat Panel 55-inch TV Console with Glass Shelves, Black

Get 54% OFF

Click here for more information about Avista Sonitus Flat Panel 55-inch TV Console with Glass Shelves, Black

Read More...

Adjustable Tilting SINGLE Desk Mount Bracket for LCD(Max 33Lbs, 10~23inch)- Black Review

Average Reviews:

(More customer reviews)The monitor stand is very sturdy and the pole is more than tall enough for my 23" eMachines E230H monitor in portrait. With 5" of clearance during rotation, this could take a larger monitor. The base is a flat piece of steel that needs a very flat surface. I will be adding some stick-on felt feet (like these or larger Waxman 7284 Self-Stick Round Felt Pads, Brown, 1-Inch) so I don't scratch the desk surface.
Mine came with 4 sets of screws for mounting, 4 each of M4 and M5, both in 10 MM and 14 MM (total of 16). So if you need M5s instead of M4s, or extra long screws like I did, you are covered.
Does it rotate as easily and feel as solid as the older $160 Kensington unit I have at work? Solid: Yes (once you tighten the head). Rotate as easily: No. This unit has one ball joint handling both the tilt and rotation, instead of a separate bearing for rotation. I end up re-tilting after rotating. But at this price, I'll work with it until it. :)

Click Here to see more reviews about: Adjustable Tilting SINGLE Desk Mount Bracket for LCD(Max 33Lbs, 10~23inch)- Black

Click here for more information about Adjustable Tilting SINGLE Desk Mount Bracket for LCD(Max 33Lbs, 10~23inch)- Black

Read More...

Jaguar 3 in 1 TV Stand - Cherry and Glossy Black Review

Average Reviews:

(More customer reviews)I usually don't write reviews, but this item is so great that I felt the need to spread the word. Outstanding TV stand - very attractive, it's sturdy, reasonably priced and it's super easy to set up. I'm a single female who put this piece together by myself (45 minutes to an hour give or take)..I like how the TV mount swivels side-to-side & tilts up and down. All in all, I'm happy - would highly recommend this product.Pros:
1) Well packaged
2) Easy to assemble - One man/woman job except for putting the TV onto the mount or wall.
3) Provides Cable Management.
4) Looks great.
Cons:
1) The glass shelves tend to collect dust and show finger prints.
I absolutely love it. It holds my 52'' Sharp Aquos LCD just fine.

Click Here to see more reviews about: Jaguar 3 in 1 TV Stand - Cherry and Glossy Black

Click here for more information about Jaguar 3 in 1 TV Stand - Cherry and Glossy Black

Read More...

Universal Rolling Cart for 32" - 60" Flat Panel Screens, with Metal Shelf (Black) Review

Average Reviews:

(More customer reviews)We purchased this stand for an office setting for lack of a good wall to hang a 40" LCD TV on, and so that the screen would be movable depending on need. Assembly was a snap. The stand is very stable, more substantial than expected and moves very easily. The stand allows the TV to tilt left/right nicely. We use our screen with a computer attached so the attached shelf works nicely for a keyboard but would also hold a dvd player or similar.
I was a little hesitant because of the price but am very satisfied with the purchase.

Click Here to see more reviews about: Universal Rolling Cart for 32" - 60" Flat Panel Screens, with Metal Shelf (Black)

Get 24% OFF

Click here for more information about Universal Rolling Cart for 32" - 60" Flat Panel Screens, with Metal Shelf (Black)

Read More...

Bell'O FP4858HG Universal Flat Mount Panel Audio Video System with Swivel TV Mounting Review

Average Reviews:

(More customer reviews)When I opened the box my first thought was "this has more parts than my first car had."
I unpacked the box and moved the pieces to the location I wanted to place it at. Moving the box whole is a two person job at least. Once assembled, the stand would take two people to move it. Be warned it is heavy (glass and metal tend to be that)and moving it once assembled would be tricky as the frame is hard to reach and the glass really isn't strong enough to take the full weight of the stand.
The stand went together in about an hour. All of the parts are clearly labeled and the screws provided fit the holes with only one exception. One of the holes that allows for adjusting the frame that holds the television was miscut and it shredded the threads of the bolt that should have fit in it. I'll hit the local hardware store for options to replace the bolt. The frame will work without this one bolt, but it was there for a reason.
The frame itself is well put together, the welds are very clean and neat, the glass shelves are well cut and each shelf clearly only fits in one location. This is a well engineered and manufactured piece.
Really four and a half stars. Minus a little for the miscut hole.
Update: I replaced the damaged bolt with an eye bolt from the hardware store. (the eye bolt allowed for better torque while screwing it in) The eye bolt also seems to have cleaned the miscuts because I can now screw and unscrew it fairly easily.

Click Here to see more reviews about: Bell'O FP4858HG Universal Flat Mount Panel Audio Video System with Swivel TV Mounting

Click here for more information about Bell'O FP4858HG Universal Flat Mount Panel Audio Video System with Swivel TV Mounting

Read More...

Bell'O TPC-361 Triple Play Universal Flat Panel Audio/Video System with Swivel TV Mounting Review

Average Reviews:

(More customer reviews)I normally don't write reviews that often but I am very excited about this TV stand I had to share (since there are no other reviews). We have hardwood floors throughout our house, and before getting this stand we had some silver colored cheap stand from IKEA. It certainly lasted long enough, but my wife and I are trying to slowly move out of the college dorm room look... This stand offers a perfect transition from the hardwood floors up to the modern design of the flat panel TV.
This is definitely a very high quality item and at a very reasonable price. My only complaint at first was the cost of shipping. But once I received the shipment I realized why as it weighs around 200 lbs. The wood is dense and seems like it can withstand some abuse over the years, and has a nice mahogany finish. The glass shelves are thick and I didn't have any hesitation putting somewhat heavy A/V equipment on it. The metal frame is solid and you can probably land a helicopter on it.
As far as space goes there is plenty. I was able to comfortably fit: A 5 disk DVD/Stereo receiver, An old VCR (never know, might come in handy someday :), and Xbox 360, a standard size comcast cable receiver, a PS3, and a Wii... And there is still plenty of space in between them so it does not look cluttered. The two drawers at the bottom are large and offer a ton of room for game controllers for all three systems, chargers, remotes, and some other random stuff, with room left over.
What ended up being a selling point for me originally is the 3-in-1 mounting option. My original plan was to mount the TV to the provided post (as pictured) then use the included wall mount later on once we get the walls painted. But once I set the TV up on the post I really loved the way it looked. All of the A/V cables can be fed through the center of the post so they are hidden. Now, the only cables you can see in the back are the power cables.
One other reason I think I might just stick to the post mount is because of the pivot mount... The mount works great on the post and allows the TV to pivot left and right. However, I feel like if it was mounted to the wall it might look a little awkward because it would be sicking out far from the wall do to the space needed for the pivot. So if you are wanted to get that picture frame look that is flush against the wall you should probably look into getting a separate wall mount.
Anyway, hope this helps...

Click Here to see more reviews about: Bell'O TPC-361 Triple Play Universal Flat Panel Audio/Video System with Swivel TV Mounting

Get 55% OFF

Click here for more information about Bell'O TPC-361 Triple Play Universal Flat Panel Audio/Video System with Swivel TV Mounting

Read More...

Z-Line Cruise Flat Panel TV Stand with Integrated Mount Review

Average Reviews:

(More customer reviews)I purchased this unit to feature my new Sony Bravia 46 in. HDTV, Sony Blu-Ray player, and Sony home theater sound system. While not the easiest piece of furniture I've put together, it's not the hardest either. The most challenging part of the process is mounting the TV to the bracket. For this step, I recommend that you have two assistants hold the TV in place while you attach the TV to the bracket. Overall, the quality of the stand is very good; the glass shelves have a nice thinkness; and look is contemporary. The only niggle I have with the stand is that it has a weight bias at the back unit, and it will tip over backwards unless all of the glass shelves are installed. Additionally, the stand will tend to lean backward approx. 5 deg. from vertical when placed on a plush-carpeted surface. This indicates that it is better suited for hard-wood or concrete surfaces. Aside from the ample storage space, the best feature is that the TV mount can be tiled side to side. If it titled up & down as well as side to side, I probably would have given this product a five (5) star rating.

Click Here to see more reviews about: Z-Line Cruise Flat Panel TV Stand with Integrated Mount

Get 43% OFF

Click here for more information about Z-Line Cruise Flat Panel TV Stand with Integrated Mount

Read More...

Peerless LCFS 100 - TV Stand for 10-30" Displays Review

Average Reviews:

(More customer reviews)I bought this stand for my home gym. It was the only one I could find at
a decent price that was also tall enough to be seen over my elliptical
trainer. It is a very solidly made stand, but not very well designed.
1st drawback: Nearly the entire thing is put together with tiny set
screws (a dozen in all) that you must tighten with a tiny allen wrench.
This makes height adjustments quite a pain. Peerless really should have
at least put a thumb screw at the height adjustment pipe. To workaround
this, I found an adjustable hose clamp with a built in plastic
thumbscrew at the 99cent store, and it works great.
2nd drawback: There is no up/down angle adjustment where the tv is
mounted, so it must always stay basically flat perpendicular to the
floor. Adding this feature would probably have added somewhat to the
price, but I would have gladly paid for it.
Other than these two issues, this is a solid and pretty nice-looking
stand which can also hide your cables pretty well.

Click Here to see more reviews about: Peerless LCFS 100 - TV Stand for 10-30" Displays

Get 28% OFF

Click here for more information about Peerless LCFS 100 - TV Stand for 10-30" Displays

Read More...

Ergotron 45-174-300 Neo-Flex LCD Arm-Extension Grommet Desk Mount Review

Average Reviews:

(More customer reviews)The Neo-flex stand might seem pricey to some, but this is a case of getting what you pay for as it is well worth the money. This stand is versatile: You can remove the extension to shorten it and it comes with parts for either a surface edge or grommet mount. The machined aluminum parts and overall aesthetic of this LCD panel VESA mount are beautiful -- and made to last. The directions have no text, but surprisingly the drawings are so well done that I understood every step of the disassembly and reassembly process (I only did this because I shortened it and then changed my mind later: It comes packaged with the extension and surface edge mount version installed and ready to go). Every joint either pans, swivels or tilts. Nothing but praise for this item (my only minor complaint is that there are no spare parts included, so don't lose any unpacking).


Click Here to see more reviews about: Ergotron 45-174-300 Neo-Flex LCD Arm-Extension Grommet Desk Mount

Get 18% OFF

Click here for more information about Ergotron 45-174-300 Neo-Flex LCD Arm-Extension Grommet Desk Mount

Read More...

Neoflex LCD Stand, Black Review

Average Reviews:

(More customer reviews)This stand replaced the stock non-height adjustable stand on my Acer X243w (24" LCD). Despite being spec'd on the manufacturers site for 22" displays or less, this stand seems to easily handle 24" or larger ones with ease. There is zero wobble. The base rotates (like a lazy-susan), the screen can be raised or lowered with one finger, and the display can be tilted or rotated. Assembly was super easy. I am very happy with this purchase.


Click Here to see more reviews about: Neoflex LCD Stand, Black

Click here for more information about Neoflex LCD Stand, Black

Read More...

3 Way Adjustable Tilting Desk Mount Bracket for LCD(Max 33Lbs, 10~25inch)- Black Review

Average Reviews:

(More customer reviews)One of the threads for the tightening knobs was slanted. Not sure if this was the caused, but the stand would not hold my 22" ViewSonic monitor upright in portrait mode. Also, buyers should clearly understand that you cannot swivel the monitor with this mount - in order to switch between portrait and landscape mode, you must remove the bracket mounting plate from the back of the monitor and reinstall it in the other mode; otherwise the hooks that attach the monitor to the bracket wouldn't work (they slide into the bracket vertically.

Click Here to see more reviews about: 3 Way Adjustable Tilting Desk Mount Bracket for LCD(Max 33Lbs, 10~25inch)- Black

Get 11% OFF

Click here for more information about 3 Way Adjustable Tilting Desk Mount Bracket for LCD(Max 33Lbs, 10~25inch)- Black

Read More...

Z-Line Designs Vitoria 55-Inch Wide TV Stand Review

Average Reviews:

(More customer reviews)Not only beautiful and sturdy, but for one relatively mechanically challenged, I was able to put this baby together in

Click Here to see more reviews about: Z-Line Designs Vitoria 55-Inch Wide TV Stand

Display a flat-panel plasma or LCD television in style on this sleek and sturdy TV stand from the innovative minds at Z-Line Designs. Designed for 65-inch screens or smaller, the Vitoria TV stand boasts a 150-pound weight capacity. The TV stand features a strong metal frame with black powder coat finish. Users can adjust the angle of the screen for optimum viewing with the stand's swivel mount. For holding DVD/BluRay players, video game systems, stereo, and more, the TV stand provides three shelves. The shelves' open air design allows air to circulate around the electronic components to increase safety. Crafted in 8mm and 6mm black tempered safety glass, the shelves benefit from chrome cylinder supports for extra stability. Pre-installed slots in the TV stand enable tidy cable management. For home assembly, the TV stand comes equipped with hardware and instructions. Z-Line Designs also offers similar Vitoria TV stands with integrated mounts. Made in China, this item is covered by a limited lifetime warranty. The assembled TV stand measures 55 inches wide by 24 inches deep by 23 inches high. This item weighs 93-3/4 pounds upon shipping.

Get 46% OFF

Click here for more information about Z-Line Designs Vitoria 55-Inch Wide TV Stand

Read More...

Z-Line Portland Flat Panel TV Stand with Integrated Mount Review

Average Reviews:

(More customer reviews)I got mine at COSTCO, not Amazon.
It looks great, matches the Black of my 50" Panasonic Plasma great along with my Left and Right speakers and stands. The Swivel mount works good. Makes it a little easier when you need to get behind your HDTV. Not a huge need to swivel with a Plasma since the viewing angle is so wide.
It's also quite a heavy stand!!! It holds a lot also. A Negative is because it's Gloss Black, it does collect a lot of dust easily.
Hanging my Plasma on the wall wasn't a option for me. I also didn't want my Plasma sitting on top of a Glass Shelf. I've seen pictures of what happens when the shelf shatters even though the Rated weight rating was much higher then the HDTV and yet still shattered. I like the look of it up in the Air. The center support blocks the view of any wires, which for me is the power cable and a single HDMI cable. It also allowed me to place the center speaker right under the center of my HDTV with it up in the Air like it is. It is adjustable Up and down, not real easily, but possible. I have mine mounted up to the second to last top hole. This allowed me to fit the speaker under the HDTV, have it at a nice viewing height which if I had just used the Stand my Plasma came with and sat it on the top shelf would have been way to LOW to view. I'm about 7 feet from my screen and even when I'm fully reclined I can still see the screen fully without even my feet blocking the screen.
I've seen other HDTV stands with these type of center lift mounts but most are pretty flimsy feeling to me. Not fully part of the stand where you can remove it and not use it if you like. Not this one. It's Part of the stand. It's bolted on. It's wide and strong. There's no give, no sway, it's solid. There's a bolt kit, with lots of different bolts to fit just about any HDTV, Plasma or LCD made to fit this stand. I popped the caps off the back of my Panasonic Plasma, Installed the 2 Brackets with the Included/Correct bolts, and lifted it onto the Stand mount, then screwed up the lock bolts to keep it from somehow being knocked off. Your HDTV isn't going anywhere!!!


Click Here to see more reviews about: Z-Line Portland Flat Panel TV Stand with Integrated Mount

Get 38% OFF

Click here for more information about Z-Line Portland Flat Panel TV Stand with Integrated Mount

Read More...